Loading...
Your
Ford (Europe)
Ranger TRB (T9) 2022->
3.0 V6 diesel 240hp 4WD (dble cab) 2022->
This product is not compatible
Ford (Europe)
Ranger TRB (T9) 2022->
3.0 V6 diesel 240hp 4WD (dble cab) 2022->
- Rear
- Right side
- Equipment : bosch
- 1 piston caliper ø 38mm
- Piston diameter (mm) 38
- Brand new unit / assembly (not reconditioned)
62,50 €
excl. VAT
Estimated shipping costs to:
- Rear
- Right side
- Equipment : bosch
- 1 piston caliper ø 38mm
- Piston diameter (mm) 38
- Brand new unit / assembly (not reconditioned)
When you press the brake pedal, your brake caliper is pressurized by the brake fluid. This action causes the piston(s) within it to push the brake pads against the brake disc, slowing down your vehicle.
When should you replace a brake caliper?
A caliper might not need replacing if you clean it thoroughly after, say, a muddy off-road trip. It's also crucial to check the wear on the brake pads to prevent the caliper pistons from extending too far out of their housing. So, in theory, if you regularly maintain your braking system, you shouldn't need to change a brake caliper.
However, it is possible to refurbish the caliper by replacing one or more of its components, such as the slider, seal, piston, guide boot, bleed screw, or caliper bracket.
-
2.2 i-DTEC diesel 150hp 4WD (RE6) 2007-> from 01/2007 and more recent
-
2.4 i-VTEC gasoline (RE4/7) 2007-> from 09/2009 and more recent
-
2.2 i-CTDi diesel 140hp 4WD (RE6) 2007-> from 01/2007 and more recent
-
2.0 i-VTEC gasoline (RE2/5) 2006-> from 01/2007 and more recent
-
2.2 iDtec 4WD 150hp 2012-> from 10/2012 and more recent
-
1.6 i-Dtec diesel 4WD 160hp 2015-> from 02/2015 and more recent
-
1.6i-DTEC diesel 2WD 120hp 2013-> from 10/2013 and more recent
-
2.2i essence AWD (RE5) 150hp 2012-> from 10/2012 and more recent
-
2.0 iVtec 2WD 155hp 2012-> from 10/2012 and more recent
Brake caliper
In stock
62,50 €
excl. VAT